Need help?Do you have a question about the CVW TX:7103 and is the answer not in the manual?
General| Brand | CVW |
|---|---|
| Model | TX:7103 |
| Category | Microphone system |
| Language | English |
Important precautions and safety guidelines for using the wireless transmission product.
Details the manual's content covering product specifications, instructions, and troubleshooting.
Overview of the wireless video transmission system and its applications.
Illustrates the application connection between the transmitter and receiver.
Details video specifications, including resolution, frame rate, and low latency.
Explains the use of 2x2 MIMO and Beam-Forming for improved wireless performance.
Covers anti-interference capabilities and point-to-point/RTSP pull flow modes.
Instructions for checking package contents and contacting the dealer for missing parts.
Details the interface and connection points of the Transmitter 7103.
Lists and describes the function of each interface on the Transmitter 7103.
Details the interface and connection points of the Receiver 3103.
Lists and describes the function of each interface on the Receiver 3103.
Explains the information displayed on the OLED screens for TX and RX units.
Information on the product's transmission range.
Details factors influencing wireless transmission distance and quality.
Step-by-step guide for installing the transmitter's antenna and battery.
Step-by-step guide for installing the receiver's antenna.
Instructions on connecting the transmitter to a camera and receiver to a monitor.
Explains methods for powering the transmitter, including NP-F battery and V-bucket batteries.
Explains methods for powering the receiver, including DC adapter and V-button battery.
Instructions on how to switch channels using the CH button.
Steps for performing code matching on the transmitter and receiver.
Details point-to-point and pull flow modes and how to switch between them.
Instructions for operating the pull flow mode, potentially via a mobile APP.
Procedure for upgrading the device's software using a USB flash drive or APP.
Technical specifications for the transmitter and receiver units.
Guidelines for optimal placement to ensure transmission distance and avoid obstruction.
Recommendations for setting frequency points to minimize interference.
Discusses environmental impacts like walls, metal, crowding, and nearby 5GHz devices.
Advice on properly connecting and handling HDMI/SDI cables.
Tips for safe installation, including antenna mounting before powering on.
Troubleshooting steps for when the transmitter and receiver cannot connect.
Solutions for video issues like mosaic or stuttering, related to setup and frequency.
Diagnosing and resolving issues when the output screen is black.
Troubleshooting steps when the receiver is connected but shows no image.
Resolving issues causing a green splash screen in the output image.
Information regarding compliance with FCC rules and potential interference.
Statement on FCC compliance with radiation exposure limits.
To Next Page