CYBELEC CybTouch 12PS - INTERNAL RESET ERROR MESSAGES; Handling Serious Internal Errors

User Manual – CybTouch series
CybTouch series – User Manual
JAN.
2020
V5.0
62/98
MSG NR.
DESCRIPTION
COMMENT
607
Command refused because other command
still active
Order of priority is as follows :
1. Stop Command
2. Go to TDC MAX
3. Go to next TDC
4. Up command
5. Down command
This table does not contain an exhaustive list of all the errors related to beam.
If the message number is not explained here, please write it down and contact
your dealer.
This kind of messages appears if a serious error occurred. The display automatically
switches to a page as shown below.
If such an error occurs,
• Write down the error number and press the Restart button.
• If the error remains, turn the machine off and let it cool down before restarting it.
• If the error still remains, write down the error number and contact your dealer.
INTERNAL RESET ERROR MESSAGES