CyberPower CP1000PFCLCD Function Setup Guide

3 4
Function
LCD Display
Options
Default
Description
Sensitivity
Low
Normal
High
Escape to Function
Menu
Normal
If the connected equipment can
tolerate more power events
(Example: unstable power often
associated with stormy weather),
select Low Sensitivity. The UPS
will go to Battery Mode less often.
If the connected equipment is more
sensitive to power events, select
High Sensitivity. The UPS will go to
Battery Mode more often.
Low Battery Warning
5~8 mins
Escape to Function
Menu
5 mins
The audible alarm will sound and
the “BATT.” icon will flash when the
remaining runtime is less than the
value selected.
Self Test
YES
Escape to Function
Menu
No action
In Line Mode, if Yes is selected, the
UPS will perform a self test.
Event Reset
YES
Escape to Function
Menu
No action
This meter records the number of
power outages.
If Yes is selected, the EVENT
counter will be cleared.
Note: Press both the DISPLAY and
SETUP Button in Status Display
can also clear the EVENT counter.
Function
LCD Display
Options
Default
Description
Return to Default Settings
YES
Escape to Function
Menu
No action
If Yes is selected, the UPS will be
restored to the factory default
settings.
Return to Status Display
- -
- -
Press the ENTER button to go
back to the status display.
All rights reserved. Reproduction without permission is prohibited.

CyberPower CP1000PFCLCD Specifications

General

Output power	600 W
UPS topology	Line-Interactive
Input frequency	60 Hz
Audible alarm(s)	Yes
Surge energy rating	1030 J
Output power capacity	1 kVA
Emergency Power Off (EPO)	No
Battery type	12V/9AH
Weight (imperial)	15.9 lbs
Nominal input voltage	90-140 V
Nominal output voltage	120 V
Dimensions (W x D x H) (imperial)	3.9 x 10.4 x 9.1 \
AC outlet types	NEMA 5–15R
AC outlets quantity	10 AC outlet(s)
Serial ports quantity	1
Form factor	Tower
Cable length	1.52 m
Display type	LCD
Certification	UL1778, cUL 107.3, FCC DOC Class B
Product color	Black
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	8 h
Typical backup time at full load	3 min
Typical backup time at half load	9 min
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 90 %
Sustainability certificates	RoHS
Bundled software	PowerPanel Personal Edition