What to do if my CyberPower UPS will not turn on?
If your CyberPower UPS won't turn on, there are several potential causes. First, the on/off switch might be preventing rapid cycling. To resolve this, turn the UPS off, wait 10 seconds, and then turn it back on. Second, ensure the UPS is properly connected to a working 110/120V 60Hz outlet.
General| Output power | 900 W |
|---|---|
| UPS topology | Line-Interactive |
| Input frequency | 47/63 Hz |
| Surge energy rating | 1840 J |
| Output power capacity | 1.5 kVA |
| Emergency Power Off (EPO) | Yes |
| Battery type | 12V/7AH |
| Weight (imperial) | 55.5 lbs |
| Dimensions (WxDxH) | 431.8 x 88.9 x 388.62 mm |
| Operating temperature (T-T) | 32 - 95 °F |
| Dimensions (W x D x H) (imperial) | 17 x 3.5 x 15.3 \ |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 8 h |
| Typical backup time at full load | 7 min |
| Typical backup time at half load | 21 min |
| Cable length | 3 m |
| Display type | LCD |
| Certification | UL1778, cUL 107.3, FCC DOC B, RoHS |
| Product color | Black |
| Modem (RJ-11) ports | 1 |
| Serial ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Bundled software | PowerPanel Business Edition |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Weight | 25200 g |
|---|
To Next Page