6
Dual Serial Ports
Professional Rack Mount UPS provides two serial ports
to allow connection and communication between the
UPS and two computers. This allows the simultaneous
shutdown of two computer systems. The Primary
computer (with PowerPanel Business Edition installed) is the computer that you
will use to control the UPS and make any changes to the operation of the UPS.
The Secondary computer (with PowerPanel™ software installed) is unable to
exhibit any control over the UPS. When there is a power failure, the Primary
computer will start to shutdown after a user controlled delay. Once the Primary
computer is shutdown, the UPS will signal the secondary computer and initiate a
shutdown. The secondary computer will then shutdown. Once the secondary
computer has completed its shutdown, the UPS will power off. Both PowerPanel
Business Edition and PowerPanel™ will save and close any open files prior to
shutting the system down.
Please go to www.cyberpowersystems.com for free download PowerPanel®
Software
To Next Page
Loading...
