CyberPower RMCARD400 User Manual

11
Item
Definition
Non-Critical
Load (NCL)
The present status of NCL outlets.
Energy
Device energy meter reading in units of kWh.
*Click "Reset" will clear Energy value to zero.
Battery
Status
The present status of the UPS battery.
Charge Mode
SBM Mode: Using Smart Battery Management (SBM) mode to charge
the batteries, which helps extend overall battery life, and Fast Charge
Technology.
Normal Mode: Using normal charge method to charge the batteries.
Charge Check
In SBM Mode: Displays the 3 operation stages (Charge Float Rest Mode)
of Smart Battery Management (SBM).
In Normal Mode: Displays charger work in Normal Mode.
Remaining
Capacity
The present capacity of the batteries, expressed as a percentage of full charge.
Remaining
Runtime
The amount of estimated time that the UPS can supply power to its load.
Voltage
The present voltage of the UPS battery.
System
Status
The present operating status of the UPS.
Temperature
The operating temperature of the UPS.
Maintenance
Breaker
Displays the present operating status of maintenance break.
[UPS->Battery Status] Display the information of the built-in battery and the Extended
Battery Modules (EBM) including battery pack temperature, voltage of each battery within
its pack and battery pack equalization status.
Item
Definition
Last Update
Date
The last date that the battery status is updated.
Update: Use this function to get the latest battery status.
Pack
The current number of UPS/EBM battery pack.
Temperature
The current temperature reading of UPS/EBM battery pack.
Voltage
The current voltage reading of each UPS/EBM battery.
Equalization
Status
Display the current battery voltage equalization status of UPS/EBM
battery pack.
Active: The battery pack equalization function is active.
Inactive: The battery pack equalization function is not active.

CyberPower RMCARD400 Specifications

General

Brand	CyberPower
Model	RMCARD400
Category	UPS
Language	English