CyberPower RMCARD400 User Manual

9
Web Interface
Login User Account
You will need to enter a User Name and Password to login to the interface, and can select
a preferred language after login. There are two user account types.
1. Administrator
- Default user name: cyber
- Default password: cyber
2. View only
- Default username: device
- Default password: cyber
You will be asked to reset a password upon the first login. The administrator can access all
functions, including enable/disable the view only account. The viewer can access read only
features but cannot change any settings.
Note: 1 . The Administrator account User Account Authentication HyperText Transfer
Protocol (HTTP) HTTP and HyperText Transfer Protocol over Secure Sockets
Layers (HTTPS) is also used for the FTP login, Power Device Network Utility, and
Upgrade and Configuration Utility.
2 . Only one user can log in and access the device at a time.
Web Content
Note: English is the default language and you can change to a preferred language.
[Summary] Provide an overview of the system operation and the items that are auto
refreshed; however, different UPS system models may have different items displayed.
Item
Definition
Current Condition
Display the current operating condition of the UPS and
environmental sensor.
UPS Status
Battery Capacity
Graph of the percentage of the current UPS battery capacity.
Load
Graph of the load of UPS as a percentage of available Watts.
Remaining Runtime
Length of time the UPS can support its load on battery power.
System Data
Name
The name given to the UPS.
Location
Location description given to the UPS.
Contact
The person to contact about this UPS.
Uptime.
Length of time the system has been working continuously
Envir Status
Temperature
Graph of the current temperature reading of the environmental sensor.
Humidity
Graph of the current humidity reading of the environmental sensor.

CyberPower RMCARD400 Specifications

General

Brand	CyberPower
Model	RMCARD400
Category	UPS
Language	English