Cybex 500C Cycle and 500R Recumbent Cycle Owner’s Manual
While you're pedaling, the console shows your progress and statistics about your workout. For
details about these displays, see the section "The Workout Display," later in this chapter.
You can change to manual mode or another program during your workout. Just
press the key for the program you want.
If you need to pause during a workout, the cycle will remember your workout information for
about 10 seconds. If you stop for longer than this, the 500C Cycle and 500R Recumbent
Cycle loses the information, and you'll have to start a new workout.
When you finish, you see a workout summary giving statistics for your total workout. See "The
Workout Display," below, for a description.
The Workout Display
During your workout, the 500C Cycle and 500R Recumbent Cycle console keeps you
continuously updated about your progress. The Progress Indicators at the top of the console
and the Workout Graph in the middle give you different views of your workout.
• The three Progress Indicators show six categories of information. At the beginning of a
workout the three top categories are shown. Pressing the Switch Display button at the
right of the fields switches between categories; the lights over and under each field
indicate which information is currently displayed. If you hold down Switch Display for half
a second, the fields will alternate between categories every five seconds.
Page 3-5
Workout Graph
Switch Display
key
To Next Page
Loading...
Need help?
General
