EasyManua.ls Logo

CYBEX 625C - Choosing and Preparing a; Site

CYBEX 625C
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24" (62 cm)1
23' (58 cm)1
65" (165 cm)248" (122 cm)2
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
Area is well lit and well ventilated.
Surface is structurally sound and properly leveled.
Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
Adjacent units may share the free area.
Free area
625R625C
23.6”, 0.6m1
23.6”, 0.6m1
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by
48 inches and be served by an accessible route for at least one of each type of exercise equipment. If
the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the clear space must
be 36 by 48 inches.
Page 12 of 80
Cybex 625C/625R Cycle Part Number LT-23688-4 F

Related product manuals