2. Install front left cover with three screws using a Phillips screwdriver.
Qty.Description
1Plastic Connectors1
1Front Left Cover2
3Screw, 8-16 × .50”3
1Screw, 8-16 × .75”4
Install accessory tray
1. Remove the two screws in the console assembly using a Phillips screwdriver.
Qty.Description
1Accessory Tray1
2Screws2
1Console Assembly3
2. Install the accessory tray to the console assembly with the two screws removed in previous step
using a Phillips screwdriver.
Level unit
Confirm that the unit is on a level surface. If not, use a 9/16” open-end wrench to adjust the leveling feet
up or down.
Page 26 of 80
Cybex 625C/625R Cycle Part Number LT-23688-4 F
To Next Page
Loading...
