9
CARRYING HANDLE ADJUSTMENT
WARNING! Always secure the baby with the
integrated harness system.
The carrying handle can be adjusted into three different
positions:
A: Carrying/Driving-Position.
B: For placing the baby in the seat.
C: Safe sitting position outside the car.
WARNING! In order to avoid unwanted tilting of the
seat whilst carrying, make sure that the handle is
locked in the carrying position A.
• In order to adjust the handle press buttons b on left and
right side on the handle a.
• Adjust the carrying handle a to the desired position by
pressing the buttons b.
NOTE! When using ATON in combination with ATON
Base or ATON Base-x the driving-position of the handle
changes from A to B.
To Next Page
Loading...
Need help?
General
