21
WARNING! In some cases the buckle q of the car
safety belt may be too long and reach into the belt
slots of the CYBEX ATON, making it dif cult to install
the ATON securely. If this is the case please choose
another position in the car.
• Insert the lap belt k into the blue belt guides m on both
sides of the car seat.
• Pull the diagonal belt l in driving direction to tighten the
lap belt k.
• Pull the diagonal belt l behind the top end of the baby
seat.
• Bring the diagonal belt l into the blue belt slot n on the
back.
• Tighten the diagonal belt l.
NOTE! Do not twist the car belt.
• Take the seat belt out of the blue belt slot n in the back.
• Open the car buckle q and take the lap belt k out of the
blue belt slots m.
REMOVING THE CAR SEAT