33
REMOVING THE COVER
ATTACHING THE SEAT COVERS
NOTE! Do not twist the shoulder straps.
in order to put the covers back onto the seat, proceed in
the reverse order as shown above.
• Open the buckle e.
• Remove the shoulder pads d from shoulder belts c.
• Pull the cover over the seat rim.
• Pull the shoulder belts c with the buckle tongues t out of
the cover parts.
• Pull the buckle e through the seat cover.
• Now you can remove the cover part.
The cover consists of 5 parts. 1 seat cover, 1 adjustable
insert, 2 shoulder pads and 1 buckle pad. To remove the
cover please follow these steps:
NOTE! Use CYBEX ATON covers only!
WARNING! The child seat must never be used
without the cover.
To Next Page
Loading...
