6
L.S.P.
Warning! For your child’s maximum protection, it is essential to use and install
the child seat according to the instructions in this User Guide.
!
Warning! The components of the CYBEX child seat must not be used either
on their own or in combination with seat cushions, backrests or headrests from
other manufacturers or other model ranges. In any such cases the child seat
!
Warning! Always ensure that the individual components of the child seat are
never compressed or jammed (e.g. by the car door or while adjusting the back
seat.)
!
NOTE! Please keep the User Guide handy in the slot under the cover at the back
of the backrest.
The child seat consists of a seat cushion (d) and a backrest (a) with a headrest
(e), which adjusts to suit the child‘s height, as well as a safety cushion (p), which is
adjustable for depth. Your child will benefit from maximum protection and comfort
only when all components are used together.
The backrest (a) is hooked onto the axis (c) of the seat cushion (d) by means of the
guide lug (b). Push the two side protectors provided with the „Linear Side-impact
Protection“ System (L.S.P.) into the installation holes (z) provided for this purpose,
on the outer edges of the shoulder brackets. These will lock into place with an
audible „CLICK“.
NOTE! Please always keep the User Guide in the slot provided for it under the
seat cover, on the back of the backrest.
FIRST INSTALLATION
b
a
a
c
e
p
z
d
To Next Page
Loading...
Need help?
General
