5
L.S.P.
Warning! For your child’s maximum protection, it is essential to use and
install the child seat according to the instructions in this User Guide.
!
NOTE! PLEASE KEEP THE USER GUIDE HANDY IN THE SLOT UNDER THE
COVER AT THE BACK OF THE BACKREST.
The child seat consists of a seat cushion (d) and a backrest (a) with a headrest
(e), which adjusts to suit the child‘s height, as well as a safety cushion (p), which
comfort only when all components are used together.
!
!
The backrest (a) is hooked onto the axis (c) of the seat cushion (d) by means of
the guide lug (b). Push the two side protectors provided with the „Linear Side-
impact Protection“ System (L.S.P.) into the installation holes (z) provided for this
purpose, on the outer edges of the shoulder brackets. These will lock into place
with an audible „CLICK“.
NOTE! PLEASE ALWAYS KEEP THE USER GUIDE IN THE SLOT PROVIDED
FOR IT UNDER THE SEAT COVER, ON THE BACK OF THE BACKREST.
FIRST INSTALLATION
Warning! The components of the CYBEX child seat must not be used
either on their own or in combination with seat cushions, backrests or
headrests from other manufacturers or other model ranges. In any such
Warning! Always ensure that the individual components of the child seat
are never compressed or jammed (e.g. by the car door or while adjusting
the back seat.)
b
a
a
c
e
p
z
d
To Next Page
Loading...
Need help?
General
Weight and Dimensions
