The following conditions may indicate a worn belt:
Condition of Belt 3D View 3D or Side View
Peeling of the belt’s skin.
Wave in belt
Belt is necked down (narrow section)
Replace belt if any section is over 1/32”
(.03) narrower than the rest of belt
Examine edge of belt (both sides). Replace
belt if any section is narrower than the
rest.
Cracks or splits
One or more strands of belt is hanging out,
or if there is a significant amount of frayed
belt.
Inspect Other Items
Inspect other items for proper operation, damage, or wear.
Page 18 of 22