To Previous Page
X
xcervantesAug 12, 2025
Why does my CYBEX V Series randomly reset or pause?
- JJohn MurrayAug 12, 2025
Your CYBEX Treadmill might be resetting or pausing due to several reasons. First, ensure the treadmill is connected to an adequate power source, ideally a dedicated 20 amp circuit in North America. Inspect the power connection at the electrical outlet and the machine to ensure it's properly seated. Also, make sure the emergency stop magnet is correctly engaged and that nothing is obstructing the stop switch on the display console or handlebar. If the ground prong on the line cord is damaged, replace the line cord.
General
