Joule 2.0 User Guide page 57
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Date and Time
Joule 2.0 date and time can be set using PowerAgent software > confi gure device.
1. Press and release the [MODE] button until Main mode is displayed.
2. Press [JOYSTICK] up/down to highlight Setup Joule. Press [JOYSTICK] in and
release to select Setup Joule.
3. Press [JOYSTICK] in and release to select Date and Time.
4. Press [JOYSTICK] up/down to highlight Date or Time. Use [JOYSTICK] to
change date and time values. Press [JOYSTICK] in and release to save changes.
5. Press [JOYSTICK] up/down to highlight Clock Format. Press [JOYSTICK] in and
release to select Clock Format. Use [JOYSTICK] to change between 12 and 24
hour format. Press [JOYSTICK] in and release to save changes.
Date:
>
Feb 26 2009
Time:
Clock Format:
12
>
Automatic DST:
>
On
>
DST Effective:
>
>
P
HR Zones
>
Pair New Sensor
>
Back
<
Report
Main
Date and Time
04:55 p
To Next Page
Loading...
