CycleOps Joule 2.0 - Page 60

Joule 2.0 User Guide page 60
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Display...continued
19. Press [JOYSTICK] up/down to highlight Speed With Zeros. Press [JOYSTICK]
in and release to select Speed With Zeros.
20. Press [JOYSTICK] up/down to change Speed With Zeros from Yes to No. Press
[JOYSTICK] in and release to save settings. Note: Speed With Zeros set to Yes will
calculate all average speed data with zeros included, Speed With Zeros set to
No will calculate all average speed data without zeros. Press [JOYSTICK] in and
release to save changes.
21. Press [JOYSTICK] up/down to highlight Language. Press [JOYSTICK] in and
release to select Language.
22. Press [JOYSTICK] up/down to change Language. Press [JOYSTICK] in and
release to save changes.
23. Press [JOYSTICK] up/down to highlight Units. Press [JOYSTICK] in and release
to select Units. Press [JOYSTICK] in and release to save changes.
24. Press [JOYSTICK] up/down to change Units. Press [JOYSTICK] in and release
to save changes.
Backlight Level:
>
2
Backlight Timeout:
Contrast:
5
>
Sleep Time:
>
4
>
Dashboard:
>
6
>
Power Smoothing:
1
Power with Zeros:
Yes
Cadence Smoothing:
Yes
Speed Smoothing:
>
1
>
Back
<
Report
Main
Display
10
Speed with Zeros:
>
No
>
Language:
>
English
>
Units:
>
English
>
18. Press [JOYSTICK] up/down to change Speed Smoothing from 1, 2,3,5,10,30.
Press [JOYSTICK] in and release to save settings. Note: Speed Smoothing 1 dis-
plays speed data as it is sent from the speed sensor, Speed smoothing 30 displays
speed data as a 30 second rolling average which can be used for better pacing
during intervals and races. Press [JOYSTICK] in and release to save changes.