Customizable parameters:
P03 refers to the backlight luminance setting option. Parameters 01, 02 and 03 are available, which represent the backlight luminance, 01
for the minimum luminance, 02 for the standard luminance and 03 for the maximum luminance.
P01 means imperial and metric system setting item: 00 for metric and 01 for imperial.
P04 is the odometer reset setting. 00 indicates not resetting and 01 indicates resetting.
P02 is the controller cruise control setting. The display can choose the following: 00→disable, 01→enable.
Press to enter parameter selecting status. Press or to select between 01, 02 and 03. Press to save the setting and return to the
Press to enter parameter selecting status. Press or to select between 00 and 01. Press to save the setting and return to the
Press to enter parameter selecting status. Press or to select between 00 and 01. Press to save the setting and return to the
If 01 is selected, press to confirm, and the display will show ------ CLP for a period of time and automatically start resetting the total mileage. After
resetting, it will automatically exit and return to the personalized parameter setting selection interface.
Press to enter parameter selecting status. Press or to select between 00 and 01. Press to save the setting and return to the
3. Backlight brightness setting
1. Select between the imperial and metric system
4. Odometer resetting
2. Controller cruise control setting
13
To Next Page
Loading...