4. Charging Instructions
1. Power off the e-bike, insert the key, and turn the
key counterclockwise to the “open” position.
2. When the battery is opened, push up the
battery and you can remove the battery from
the e-bike. Hold the battery when removing it.
4.1 Charge the e-bike with the battery on
the bike
Open the rubber cover of the charging port on the right side of the e-bike.
Insert the DC connector of the charger cable into the battery charging port.
Note: Place the charger on a flat and safe surface during charging.
indicator on the charger is red during charging and turns green after
the battery is fully charged.
connector from the charging port.
07
Battery
charging port
Indicator
To Next Page
Loading...