3. Assembly Instructions
fully assembled.
the manual, please contact us via email at support@cycrown.com
Before Assembly
3.1 Assemble and install the front wheel
1. Find the front wheel.
2. Sit the front fork on the front wheel axle. Make sure the disc brake
rotor is between the brake pads and the axle is fully engaged into the
front fork dropouts.
3. Install the safety washers onto the axle and adjust them so that
they hook the front fork. Then, tighten the nuts on two sides with an
appropriate wrench (included).
03
1
2
3
4
Make sure the front wheel is installed tightly.
To Next Page
Loading...