21
Combined Audio and Video Routing Command Example
It is also possible to switch audio and video simultaneous by using an
advanced command structure. In this case the individual parameters
of the “HDBT_Out” command are separated by a comma. Please check
section 6.8.1 for additional information on how commands can be
combined.
Route audio and video from HDMI input 1 to HDBaseT output A
simultaneously:
COMMAND DESCRIPTION
HDBT_Out A VideoSrc=HDMI_In 1,
AudioSrc=HDMI_In 1
Video and Audio switch command
Every individual audio and video input has a bespoke command (including
separate commands for the audio and video within a HDMI source).
To Next Page
Loading...