CYP XA-4 - Page 23

23
PATTERN MODE
LEVEL 1 LEVEL 2 LEVEL 3
A Mode Colour
(Analyser mode only)
Red
Blue
Black
OSD Settings P Mode Colour
(Pattern mode only)
Red
Blue
Black
Ethernet IP Mode DHCP
Static
IP Address X.X.X.X (192.168.1.50)
Subnet Mask X.X.X.X (255.255.255.0)
Gateway X.X.X.X (192.168.1.254)
Setup Firmware Update No/Yes
Image 640×480 Update No/Yes
Image 1920×1080 Update No/Yes
[Letter H] Option 2 Small
Medium
3D Source Image Bypass No/Yes
Information Refresh 1 Sec ~ 2 Sec (2 Sec)
Manual
IR Controller Address 0 ~ 3 (0)
Copied EDID Reset No/Yes
Ethernet Reset No/Yes
Factory Reset No/Yes
Information [Unit Version Details]
i
Factory Default: Items in Bold are the factory default settings.
i
Power-On Reset: Settings marked with *PoR are reset to the default when the
unit is powered off and back on.
i
HDR Output Emulator Limitations: This function simulates HDR info frame
(DRMI) and AVI colourimetry (BT.2020, etc.) output. It does not generate HDR/
colourimetry video content.