CYP XA-4 - Page 58

58
COMMANDS
DESCRIPTION VARIABLES
$RX_SCDC N1

Enable or disable the SCDC port
function on the HDMI input (Rx).
N1 = ON, OFF
$RX_SCDC?

Display the current SCDC port state for
the HDMI input (Rx).
$RX_SENSE N1

Enable or disable the RxSense function
for the HDMI input (Rx).
N1 = ON, OFF
$RX_SENSE?

Display the current RxSense state for
the HDMI input (Rx).
$SINK_DETECT? N1

Displays a variety of sink detection
status and informational values.
Available values for N1: See below.
HOTPLUG [Sink’s hot plug status]
RSENSE [Sink’s RxSense status]
HDCP [Sink’s HDCP port status]
HDCP_AKSV [Source HDCP AKSV in 2-digit hex (HDCP v1.4)]
HDCP_BKSV [Rx HDCP BKSV in 2-digit hex (HDCP v1.4)]
HDCP_RXID [Rx Receiver ID in 2-digit hex (HDCP v2.2)]
SCDC [SCDC port status]
SCDC_SCR_ENABLE [Rx SCDC source scrambling setting]
SCDC_SCR_STATUS [SCDC sink scrambling status]
SCDC_SINK_VER [SCDC sink version]
SCDC_SOURCE_VER [SCDC source version]