3
External Features
Port Connectors
The DP-301P+’s parallel port is located on its front panel. The port is configurable
using the Web Configuration Interface or the print server’s Telnet interface. The Print
Server’s Web configuration permits users to configure settings through the web
browser.
Default IP Address of DP-301P+ is set as automatically getting from DHCP server or
Router which build-in DHCP server.
NOTE: The PC’s IP Address must be in the same subnet as the print server’s IP
Address for the two devices to communicate. (For example, if print server’s IP
Address is 192.168.0.10, with a subnet mask of 255.255.255.0, then your
computer’s IP Address should be 192.168.0.x, where x is a value between 1-254,
excluding 10.)
To Next Page
Loading...
