D-Link AirPlus DWL-G730AP - Getting Started: Client Mode Configuration; Setting up as a Wireless Client

11
10
11
10
Please remember that D-Link AirPlus G wireless devices are pre-configured to
connect together, right out of the box, with their default settings.
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
An Example of a Wireless Infrastructure Network
2
1
3
4
Getting Started - in Client mode
Connect the D-Link AirPlus G DWL-G730AP (in client mode) to your laptop.
(See the Quick Installation Guide included with the DWL-G730AP.)
For a typical wireless setup at home (as shown above), please do the following:
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)