D-Link AirPlus DWL-G730AP - Configuration Utility: AP Client Mode Operations; Accessing the Web Configuration Interface

25
24
25
24
Using the Configuration Utility in
AP Client Mode
Whenever you want to configure your network or the
DWL-G730AP, you can access the Configuration
Menu by opening the Web browser and typing in
the IP address of the DWL-G730AP. The
DWL-G730AP default IP address is shown at
right.
Home > Wizard
The Home>Wizard
screen will appear.
Please refer to the
Quick Installation
Guide for more
information
regarding the
Setup Wizard.
Open the Web browser
Type in the IP address of the AP Client (http://192.168.0.30)



Note: if you have changed the default IP address
assigned to the DWL-G730AP, make sure to enter the
correct IP address.


Type admin in the User Name field
Leave the Password blank
Click OK