EasyManua.ls Logo

D-Link AirPlus DWL-G730AP - Getting Started: Router Mode Configuration; Setting up as a Wireless Router

D-Link AirPlus DWL-G730AP
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
10
11
10
Please remember that D-Link AirPlus G wireless devices are pre-configured to
connect together, right out of the box, with their default settings.
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem.
If you are connecting a desktop computer in your network, you can install the
D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot
on your desktop computer.
(See the Quick Installation Guide included with the DWL-G510.)
Install the drivers for the wireless Cardbus adapter into a laptop computer.
(e.g, the DWL-G630; See the Quick Installation Guide included with the
DWL-G630.)
An Example of a Wireless Infrastructure Network
2
1
3
4
Getting Started - in Router mode
Connect the modem to the D-Link AirPlus G DWL-G730AP (in router mode).
(See the Quick Installation Guide included with the DWL-G730AP.)
For a typical wireless setup at home (as shown above), please do the following:
5
Getting Started - in Client mode
For a typical wireless setup at home (as shown above), please do the following:

Other manuals for D-Link AirPlus DWL-G730AP

Related product manuals