After you have completed the initial installation and the Setup Wizard (as illustrated
in the Quick Installation Guide that is included with the DWL-G730AP), and you have
selected AP Mode, you can access the configuration menu, at any time, by opening
the web-browser and typing in the IP address of the DWL-G730AP.
The DWL-G730AP’s default IP address is shown below:
Open the web browser
Type in the IP address of the
DWL-G730AP. (192.168.0.30).
Type admin in the
User Name field
Leave the Password
blank
Click OK
Using the Configuration Utility in AP Mode
Note: If you have changed the default IP address assigned to the DWL-G730AP, make sure to
enter the correct IP address.
The Home>Wizard screen will
appear. Please refer to the
Quick Installation Guide for
more information regarding the
Setup Wizard.
http://192.168.0.30
To Next Page
Loading...
