SSID: (Service Set
Identifier) Default is
the default setting. The
SSID is a unique name
that identifies a network.
All devices on a network
must share the same
SSID name in order to
communicate on the
network. If you choose to
change the SSID from the
default setting, input your
new SSID name in this
field.
Channel: Channel 6 is
the default channel. Input a
new number if you want to
change the default setting.
All devices on the network must be set to the same channel to communicate on the
network.
Authentication:
When WPA is selected fill in the following fields:
RADIUS Server 1 IP: Enter the IP address of the RADIUS server.
Port: Enter the Port number here.
Shared Secret: Enter the shared secret here.
Apply: Click Apply to apply the changes.
Using the Configuration Utility in AP Mode (continued)
Home > Wireless > WPA
Select WPA to select Wi-Fi Protected Access in conjunction with a
RADIUS server in your network.
RADIUS Server 2 IP: Enter the IP address of the RADIUS server.
Port: Enter the Port number here.
Shared Secret: Enter the shared secret here.
To Next Page
Loading...
