D-Link AirPlus DWL-G730AP - Viewing Device Information in Router Mode

57
56
57
56
Using the Configuration Utility in Router Mode (continued)
Status > Device Info
This page displays the
current information for the
DWL-G730AP. It will display
the LAN, WAN and MAC
address information.
If your WAN connection is
set up for a Dynamic IP ad-
dress then a Release button
and a Renew button will be
displayed. Use Release to
disconnect from your ISP
and use Renew to connect
to your ISP.
If your WAN connection is set
up for PPPoE, a Connect
button and a Disconnect
button will be displayed. Use
Disconnect to drop the PP-
PoE connection and use Con-
nect to establish the PPPoE
connection.
This window will display the following settings:
MAC address of the DWL-G730AP
Client connection (DHCP or PPoE client status)
IP address: WAN/Public IP address
Subnet Mask: WAN/Public subnet mask
Gateway: WAN/Public Gateway IP address
Domain Name Server: WAN/Public DNS IP address
Wireless
MAC address of the DWL-G730AP
IP Address: LAN/Private IP address of the DWL-G730AP
Subnet Mask: LAN/Private subnet mask
DHCP Server (Enabled or Disabled)
WAN
LAN
MAC Address: Displays the MAC address
SSID: Displays the current SSID
Channel: Displays the current channel
WEP: indicates whether WEP is enabled or disabled