D-Link COVR-1900 User Manual

41D-Link COVR-1900 User Manual
Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
IPv6 Address
Assignment
Enable or disable the Automatic IPv6 Address Assignment
feature.
Enable Automatic
DHCP
-PD in LAN
Enable or disable DHCP-PD for other IPv6 routers connected
to the LAN interface.
Autoconfiguration
Type
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you selected
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Advertisement
Lifetime
Enter the router advertisement lifetime (in minutes).
If you selected
Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Range (Start)
Enter the starting IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
Range (End)
Enter the ending IPv6 address for the DHCP server’s IPv6
assignment.

D-Link COVR-1900 Specifications

General

Brand	D-Link
Model	COVR-1900
Category	Wireless Router
Language	English