D-Link COVR-1900 User Manual

56D-Link COVR-1900 User Manual
Section 3 - Configuration
Smart Connect
Status Enable or disable the Smart Connect Feature. When enabled,
only a few configuration options are available to simplify
configuration.
If Smart Connect is Status is
Enabled:
Wireless
Wi-Fi Name (SSID) Create a name for your wireless network using up to 32
characters.
Password Create a password to use for wireless security. Wireless clients
will need to enter this password to successfully connect to
the network.
Wireless - Advanced Settings...
Security Mode Choose N
one, WPA/WPA2-Personal (recommended) or
WPA3-Personal.
Transmission Power Select the desired wireless transmission power.
Schedule Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
Wireless
In the Settings menu on the bar at the top of the page, click Wireless to see your wireless network settings for your
COVR-1900.
Click Save at any time to save the changes you have made on this page.

D-Link COVR-1900 Specifications

General

Brand	D-Link
Model	COVR-1900
Category	Wireless Router
Language	English