81D-Link COVR-1900 User Manual
Section 3 - Configuration
Quick VPN
In the Features menu on the bar at the top of the page, click Quick VPN. This page will help you configure the Quick VPN
feature of your router. For more information, refer to Quick VPN on page 104. Before proceeding, ensure that your Internet
connection is working properly. We recommend configuring Dynamic DNS before proceeding with Quick VPN setup. If your
router is assigned an IP address from your ISP using DHCP, it may frequently change, requiring clients credentials to be set
up again and a simple DDNS address will be easier than an IP address.
To configure the User settings and create, manage, and delete user accounts with user-defined access to certain router
services, click the User link. Refer to User on page 86
Click Save at any time to save the changes you have made on this page.
L2TP over IPSec Enable or disable the Quick VPN server.
Username Enter a username between 1 and 20 characters.
Password Enter a password between 1 and 20 characters.
PSK Enter a passkey between 6 and 64 characters.
VPN Profile for iOS
De
vice and MAC OS X
Click export to save the VPN profile settings file for iOS devices
or Mac OS X.
Advanced Settings...
Authentication
Protocol
Choose the authentication protocol type: MSCHAPv2, PAP,
or CHAP. MSCHAPv2 is the default.
MPPE Select the encryption cipher strength: None, RC4-40, or RC4-
128. RC4-128 is the default.
To Next Page
Loading...
Need help?
General
