27D-Link COVR-3902 User Manual
Section 2 - Installation
Setup Wizard (continued)
Step 6
If the router does not detect a valid Internet connection, a list of connection
types to choose from will be displayed. Choose the connection type you want
to use and tap Next. Unless you are connecting to the Internet through PPPoE
or your ISP has assigned you a static IP address, select DHCP Connection.
Step 7
If the router detected or you selected PPPoE, enter your PPPoE username and
password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software
is no longer needed and will not work through a router.
To Next Page
Loading...
Need help?
General
