28D-Link COVR-3902 User Manual
Section 2 - Installation
Setup Wizard (continued)
Step 8
If the router detected or you selected Static, enter the IP and DNS settings
supplied by your ISP. Click Next to continue.
Step 9
Enter a network name and create a Wi-Fi password (between 8-63 characters) for
your Covr Wi-Fi network. Your wireless clients will need to enter this password
to be able to connect to your wireless network.
Click Next to continue.
Note: The COVR-3902 uses a single wireless network for both the 2.4 GHz and 5
GHz wireless bands. When connecting clients to the Covr wireless network, they
will be automatically added to the best wireless band, either 2.4 GHz or 5 GHz.
To Next Page
Loading...
Need help?
General
