14
Q9: How do I log in to my Covr Router?
Verify that your computer or laptop is connected to the Covr router either via an Ethernet cable or
wirelessly, then follow the steps below:
Step 1: Open your web browser and enter the address of the router into the address bar. The default
URL is “http://covr.local./”
Step 2: Log into web user interface using your login and password. By default, the username is admin
and no password.
Note: If this is the first time setting up the COVR-C1203 system, you can only set up the system
wirelessly. First time set up using Ethernet is not supported.
To Next Page
Loading...
