D-Link COVR Series User Manual

38D-Link COVR-2202 || COVR-2200 User Manual
Section 3 - Conguration
Wireless
Wi-Fi
Covr Wi-Fi System
Status: Indicates the status of the seamless Covr Wi-Fi system. This feature
cannot be disabled.
MU-MIMO: Click to enable or disable Multi-User Multiple Input Multiple Output
(MU-MIMO). Enabling this feature will allow the Covr Points to
communicate with multiple devices at once for faster and more
ecient throughput. It is recommend to leave this feature enabled.
Advanced Settings
Wi-Fi Name (SSID): Enter a name for your Covr Wi-Fi network.
Password: Create a password for your Covr Wi-Fi network. Wireless clients will
need to enter this password to successfully connect to the network.
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedule section. Refer to
Schedule on page
56 for more information.
From this page you can congure your Covr Wi-Fi settings.

D-Link COVR Series Specifications

General

MU-MIMO	Yes
Mesh Technology	Yes
Guest Network	Yes
Beamforming	Yes
Wi-Fi Standard	802.11ac
Frequency Bands	Dual-band
Wireless Speed	AC1200 (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz)
Antenna Type	Internal
Mobile App Support	Yes
Setup	Mobile App
Coverage	Up to 5, 000 sq ft (with 3-pack)