D-Link COVR Series User Manual

54D-Link COVR-2202 || COVR-2200 User Manual
Section 3 - Conguration
Dynamic DNS (Continued)
The IPv6 host settings are found at the bottom of the Dynamic DNS page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Record button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Host Name: Enter the host name that you registered with your dynamic DNS
service provider.
IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select
the server device in the drop-down menu.
Click Apply when you are done.

D-Link COVR Series Specifications

General

MU-MIMO	Yes
Mesh Technology	Yes
Guest Network	Yes
Beamforming	Yes
Wi-Fi Standard	802.11ac
Frequency Bands	Dual-band
Wireless Speed	AC1200 (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz)
Antenna Type	Internal
Mobile App Support	Yes
Setup	Mobile App
Coverage	Up to 5, 000 sq ft (with 3-pack)