D-Link COVR Series User Manual

58D-Link COVR-2202 || COVR-2200 User Manual
Section 3 - Conguration
System Log (Continued)
SMTP Server
Address:
Enter your SMTP server address.
SMTP Server Port: Enter your SMTP server port.
Enable
Authentication:
Enable this option if your SMTP server requires authentication.
Account Name: Enter your SMTP account name.
Password: Enter your SMTP account password.
E-mail Log When Full or On Schedule
Send When Log
Full:
If enabled, this option will set Covr Point A to automatically send the log
when it is full.
Send on Schedule: If enabled, this option will set Covr Point A to send the log according
to a set schedule.
Schedule: If you enable Send On Schedule, use the drop-down menu to select
a schedule to apply. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedule section. Refer to
Schedule on page 56 for more information.
Click Save when you are done.

D-Link COVR Series Specifications

General

MU-MIMO	Yes
Mesh Technology	Yes
Guest Network	Yes
Beamforming	Yes
Wi-Fi Standard	802.11ac
Frequency Bands	Dual-band
Wireless Speed	AC1200 (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz)
Antenna Type	Internal
Mobile App Support	Yes
Setup	Mobile App
Coverage	Up to 5, 000 sq ft (with 3-pack)