60D-Link COVR-2202 || COVR-2200 User Manual
Section 3 - Conguration
Advanced Settings - LED Control
Status LED: Choose to enable or disable the COVR status indicator LED
on the
front panel of both Covr Point A and the other Covr
Point(s). When disabled, the LED will no longer light up solid
white during normal operation and will instead turn o.
The LED will still light up in the corresponding color and mode in
any of the following circumstances:
-Firmware upgrade
-Device reboot
-Establishing a WPS connection
-Weak uplink signal
-No uplink signal
Once any of the above situations has ended, the LED will briey light
up solid white and then turn o again.
Click Save when you are done.
Admin (Continued)
To Next Page
Loading...
