8 DAP-1325 Install Guide
Once you connect, the login page will appear. Enter your password and click
Log In. By default the password is blank.
Note: If this is the rst time logging in to the DAP-1325, you will be directed to the
Wizard automatically. Skip to step 6.
4
Note: The default IP address is 192.168.0.50. Once the DAP-1325 connects to your
router, it will get assigned a new IP address based on your router’s DHCP settings.
You will need to log in to your router and view the DHCP table to see what IP address
was assigned to the DAP-1325. The MAC address is printed on the label on the device.
The home page will display your current status. A green check mark represents
a successful connection to your wireless router or Access Point. A red X means
there is not a connection to your router or access point. Click the Uplink Router
icon.
5
To Next Page
Loading...
