D-Link DAP-1360U

DAP-1360U Quick Installation Guide
Conguring WDS Function
This configuration step is available for the WDS mode.
1. On the WDS page, in the WDS Mode list, select the WDS function
mode.
2. In the WDS Encrytion list, select a type of encryption for data transfer
between access points interconnected via the WDS function. Then enter a
key for the specified type of encryption in the Encryption Key field (a
password that will be used to access the wireless network between the
interconnected access points). When the Without encryption value is
selected, traffic between the access points will not be secured.
3. In the Channel list, select the wireless channel number. The same
wireless channel for the interconnected access points should be specified.
18