6 DAP-1610 Install Guide
Connect Your Wireless Devices
5
6
Your device is now connected to the DAP-1610 and can connect to your wireless
router. If you want to change your network settings, password, etc., follow the
steps on the next page to congure the DAP-1610. To connect additional
devices, repeat step 5.
Your setup is complete!
Extended network
Original network
From your wireless device go to the Wireless Utility to display the available
wireless networks.
The SSID on the DAP-1610 will automatically be assigned the following:
(Your Router’s SSID)-EXT
The Wi-Fi password for the DAP-1610 will be the same as your router.
Repeat step 5 to connect additional Wi-Fi devices to the DAP-1610.
To Next Page
Loading...
