D-Link DCS-2210

13D-Link DCS-2210/2230 User Manual
Conguration
Web-based Conguration Utility
This section explains how to congure your new D-Link Network Camera using the Web-based Conguration Utility.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Select the camera and click the button labeled "Link" to access the web conguration.
The Setup Wizard will automatically open your web browser to the IP address of the
camera.
Alternatively, you may manually open a browser and enter the IP address of the
camera: 192.168.0.20