D-Link DCS-2210

22D-Link DCS-2210/2230 User Manual
Conguration
This wizard will guide you through a step-by-step process to congure your camera's
motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the detection
sensitivity, and adjust the camera’s ability to detect movement.
You may specify whether the camera should capture a snapshot or a video clip when
motion is detected.
Please see the Motion Detection section on page 34 for information about how to
congure motion detection.
Step 2
This step allows you to enable motion detection based on a customized schedule.
Specify the day and hours. You may also choose to always record motion.
Motion Detection Setup Wizard