D-Link DCS-2210

37D-Link DCS-2210/2230 User Manual
Conguration
Application
In a typical application, when motion is detected, the DCS-2230 Network Camera sends images to a FTP server or via e-mail as notications. As
shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an
event is triggered, a specied action will be performed. You can congure the Network Camera to send snapshots or videos to your e-mail address
or FTP site.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action shall be
performed when a trigger is activated.