D-Link DCS-5009L

42D-Link DCS-5009L User Manual 42
Section 4 - Conguration
Time and Date
Current Time:
Time Zone:
Synchronize
NTP Server:
NTP Server
Used:
Daylight Saving:
Set the Date and
Time Manually:
Displays the current date and time.
Select the Time Zone for your region from the drop-down menu.
Enabling this option will allow the camera to update its system clock
automatically from an NTP server.
When Synchronize NTP Server is enabled, you can select the NTP Server
closest to you from the drop-down menu.
Click to enable Daylight Saving Time (DST). If DST is enabled, you can
select an Oset using the drop-down menu, or enter a Start and End
date with the Month, Week, Day of Week, and Time.
When Synchronize NTP Server is not enabled, you can set the date and
time of the internal system clock manually. Or you can click on Copy
Your Computer’s Time Settings to automatically set the date and
time based on your computer’s settings.
Click Save Settings.
This section allows you to congure the settings of the internal system clock for your camera.