D-Link DCS-5009L

46D-Link DCS-5009L User Manual 46
Section 4 - Conguration
System
This section allows you to save and restore your conguration, restore the factory settings, and/or restart the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Click Save Conguration to save the current camera conguration
to your local PC.
To load a previously saved conguration, click Browse... and select
your saved conguration le. Then click Restore Conguration From
File to load the le from the local hard drive.
Click Restore Factory Defaults to reset all settings back to the factory
defaults. Please note that this will erase any changes you have made
to the settings of the camera.
Click Reboot the Device to reboot the camera.